For angled elbows, slide the internal connector into the rail end until the metal spacer screw touches either the rail's end or the collar if you used one. Step 2: Begin the connectionįor the adjustable elbow, slide it into the rail and ensure it fits tightly against the rail. Slide the collar ring over the rail before inserting it into the elbow. Use a collar ring to hide the seam between the elbow and the rail if desired. Step 1: Cut the railingĬut the railing to the proper length based on the location of the elbows and other components being used. ![]() Step 6: Attach the wall returnįinally, attach the wall return to the post as previously described and use end caps where required for a finished appearance.Įlbows are used to change the direction of your handrail on a staircase or ramp. Remove the metal spacer screw using a #2 square-head screwdriver and push the handrail return further over the internal connector until it fits in the collar (if you used one) or fits tightly against the elbow. Slide the opposite end of the handrail return onto the internal connector until it's touching the metal spacer screw. The wall return is designed to fit tightly into the rail, so the location of the attachment is critical. Make sure the wall return is at the proper angle of alignment to the post. Next, attach the wall return to the lower end of the handrail return (the longer side). Once everything is lined up, slide the internal connector into the appropriate elbow until the metal spacer screw is touching either end of the elbow or the collar, if you used one. This means checking that the wall mount on the post lines up with the location of the elbow on the rail. Step 2: Align the componentsīefore you attach anything, make sure all the components are aligned properly. ![]() Slide the collar ring over the rail before inserting it into the other component. You'll also want to use a collar ring if you want to hide the seam between the handrail return and the rail or elbow. Step 1: Cut the railingįirst, make sure you have the right railing length for your handrail return. Handrails ensure your railing extends beyond the top and bottom of a set of stairs or a ramp, as required by ADA guidelines. Step 5: Attach the railįinally, attach the connected rail to the wall mount using the provided hardware and finish by attaching the end cap to the rail for a safe, professional finish. To help with an angled attachment, place one screw into the bottom hole of the bracket and pivot the wall mount to the required position. Make sure each wall mount is at the proper angle of alignment to the angle of the rail. Step 4: Attach wall mountsĪttach wall mounts as needed to posts using the provided hardware, keeping in mind that a wall mount must be used at each rail-to-rail seam connection. With the screw removed, push the second rail further over the internal connector until it fits in the collar or tightly against the opposite rail. Next, remove the spacer screw using a #2 square-head screwdriver. Next, slide the second rail over the opposite end of the internal connector until it is also touching the metal spacer screw. ![]() Slide the internal connector into the rail end until the metal spacer screw touches either the end of the handrail or the collar if you’re using one. Make sure to slide the collar over one rail before connecting. To hide the seam where the two pieces of handrail will meet, you can use a collar ring. Step 1: Cut the railingĬut railings to size if two or more full-lengths are not required. Posts must be installed at a maximum of 6 feet on center when using rail-to-rail connections. Rail-to-rail straight connections are used for longer spans of handrails.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |